CDH5.4离线安装，

和通数据库htsjk.Com2019-10-11 06:46 来源:未知阅读:2968 评论 309 热度3

标签：

CDH5.4离线安装，

Cloudera Manager离线部署CDH文档

一、说明

操作系统：CentOS 6

JDK版本：1.7.0_80

所需安装包及版本说明：

CDH-5.4.0-1.cdh5.4.0.p0.27-el6.parcel

CDH-5.4.0-1.cdh5.4.0.p0.27-el6.parcel.sha

manifest.json

cloudera-manager-el6-cm5.4.3_x86_64.tar.gz

Cloudera Manager下载目录

http://www.cloudera.com/downloads/manager/5-4-3.html

CDH下载目录

http://archive.cloudera.com/cdh5/parcels/5.4.0/

CHD5相关的Parcel包放到主节点的/opt/cloudera/parcel-repo/目录中

CDH-5.1.3-1.cdh5.1.3.p0.12-el6.parcel.sha1重命名为CDH-5.1.3-1.cdh5.1.3.p0.12-el6.parcel.sha，这点必须注意，否则，系统会重新下载CDH-5.1.3-1.cdh5.1.3.p0.12-el6.parcel文件

本文采用离线安装方式，在线安装方式请参照官方文档。

二、系统环境搭建

1、网络配置(所有节点)

vi /etc/sysconfig/network 修改hostname：

通过service network restart 重启网络服务生效

vi /etc/hosts ,修改ip与主机名的对应关系

2、SSH免密码登录

主节点执行：

ssh-keygen -t dsa -P '' -f ~/.ssh/id_dsa

生成无密码密钥对

拷贝公钥到其他节点，执行

cat ~/.ssh/id_dsa.pub >> ~/.ssh/authorized_keys

测试：主节点ssh其他节点……

3、关闭防火墙

临时关闭：

service iptables stop

重启后生效：

chkconfig iptables off

4、关闭SELINUX

临时关闭：

setenforce 0

修改配置文件/etc/selinux/config（重启生效）：

将SELINUX=enforcing改为SELINUX=disabled

查看SELINUX状态：

1、/usr/sbin/sestatus –v

SELinux status:enabled（enabled：开启；disabled：关闭）

2、使用命令：getenforce

5、安装JDK

摘自官网：

The Oracle JDK installer is available bothas an RPM-based installer for RPM-based systems, and as a binary installer forother systems.

CDH 5.4.x is supported with the versions shownin the following table:

Minimum Supported Version	Recommended Version	Exceptions
1.7.0_55	1.7.0_67 or JDK1.7_75	None
1.8.0_40	1.8.0_40 or higher	None

本文采用RPM包安装…….执行：

rpm -ivh jdk-7u80-linux-x64.rpm

配置环境变量，修改/etc/profile：

export JAVA_HOME=/usr/java/jdk1.7.0_80

export PATH=$JAVA_HOME/bin:$PATH

export CLASSPATH=.:$JAVA_HOMdE/lib/dt.jar:$JAVA_HOME/lib/tools.jar

生效：

source /etc/profile

查看版本：

[root@slave6 cdh]# java -version

java version "1.7.0_80"

Java(TM) SE Runtime Environment (build1.7.0_80-b15)

Java HotSpot(TM) 64-Bit Server VM (build24.80-b11, mixed mode)

6、设置NTP

所有节点安装NTP：

yum install ntp

配置开机启动：

chkconfig ntpd on

检查是否设置成功：

chkconfig --list ntpd （2-5为on状态则成功）

设置同步：

ntpdate -u ntp.sjtu.edu.cn（时钟服务器根据实际环境设置、本文采用210.72.145.44-国家授时中心服务器IP地址）

7、安装配置MySql

MySql版本选择、摘自官网：

Supported Databases：

Component	MySQL	SQLite	PostgreSQL	Oracle	Derby - see Note 4
Oozie	5.5, 5.6	–	8.4, 9.2, 9.3 See Note 2	11gR2	Default
Flume	–	–	–	–	Default (for the JDBC Channel only)
Hue	5.1, 5.5, 5.6 See Note 6	Default	8.4, 9.2, 9.3 See Note 2	11gR2	–
Hive/Impala	5.5, 5.6 See Note 1	–	8.4, 9.2, 9.3 See Note 2	11gR2	Default
Sentry	5.5, 5.6 See Note 1	–	8.4, 9.2, 9.3 See Note 2	11gR2	–
Sqoop 1	See Note 3	–	See Note 3	See Note 3	–
Sqoop 2	See Note 4	–	See Note 4	See Note 4	Default

Note:

MySQL 5.5 is supported on CDH 5.1. MySQL 5.6 is supported on CDH 5.1 and later. The InnoDB storage engine must be enabled in the MySQL server.
PostgreSQL 9.2 is supported on CDH 5.1 and later. PostgreSQL 9.3 is supported on CDH 5.2 and later.
For the purposes of transferring data only, Sqoop 1 supports MySQL 5.0 and above, PostgreSQL 8.4 and above, Oracle 10.2 and above, Teradata 13.10 and above, and Netezza TwinFin 5.0 and above. The Sqoop metastore works only with HSQLDB (1.8.0 and higher 1.x versions; the metastore does not work with any HSQLDB 2.x versions).
Sqoop 2 can transfer data to and from MySQL 5.0 and above, PostgreSQL 8.4 and above, Oracle 10.2 and above, and Microsoft SQL Server 2012 and above. The Sqoop 2 repository database is supported only on Derby and PostgreSQL.
Derby is supported as shown in the table, but not always recommended. See the pages for individual components in the Cloudera Installation and Upgrade guide for recommendations.
CDH 5 Hue requires the default MySQL version of the operating system on which it is being installed (which is usually MySQL 5.1, 5.5 or 5.6).

安装过程略……本文采用MySql 5.5

所需数据库说明，摘自官网：

The Cloudera Manager Server, Oozie Server, Sqoop Server, Activity Monitor, Reports Manager, HiveMetastore Server, Sentry Server, Cloudera Navigator Audit Server, and ClouderaNavigator Metadata Server all require databases. The type of datacontained in the databases and their estimated sizes are as follows:

Cloudera Manager - Contains all the information about services you have configured and their role assignments, all configuration history, commands, users, and running processes. This relatively small database (<100 MB) is the most important to back up.

Important: Whenprocesses restart, the configuration for each of the services is redeployed usinginformation that is saved in the Cloudera Manager database. If this informationis not available, your cluster will not start or function correctly. You musttherefore schedule and maintain regular backups of the Cloudera Managerdatabase in order to recover the cluster in the event of the loss of thisdatabase.

Oozie Server - Contains Oozie workflow, coordinator, and bundle data. Can grow very large.
Sqoop Server - Contains entities such as the connector, driver, links and jobs. Relatively small.
Activity Monitor - Contains information about past activities. In large clusters, this database can grow large. Configuring an Activity Monitor database is only necessary if a MapReduce service is deployed.
Reports Manager - Tracks disk utilization and processing activities over time. Medium-sized.
Hive Metastore Server - Contains Hive metadata. Relatively small.
Sentry Server - Contains authorization metadata. Relatively small.
Cloudera Navigator Audit Server - Contains auditing information. In large clusters, this database can grow large.
Cloudera Navigator Metadata Server - Contains authorization, policies, and audit report metadata. Relatively small.

建库操作及脚本参照：步骤三、步骤六

8、下载依赖包

chkconfig
python (2.6 required for CDH 5)
bind-utils
psmisc
libxslt
zlib
sqlite
cyrus-sasl-plain
cyrus-sasl-gssapi
fuse
portmap
fuse-libs
redhat-lsb

三、Cloudera Manager Server&Agent安装

1、安装ClouderaManager Server&Agent

拷贝cloudera-manager-el6-cm5.4.3_x86_64.tar.gz到所有Server、Agent节点

创建cm目录：

mkdir/opt/cloudera-manager

解压cm压缩包：

tarxvzf cloudera-manager*.tar.gz -C /opt/cloudera-manager

2、创建用户cloudera-scm（所有节点）

cloudera-scm用户说明，摘自官网：

Cloudera Manager Server and managedservices are configured to use the user account cloudera-scm by default,creating a user with this name is the simplest approach. This created user, isused automatically after installation is complete.

执行：

useradd --system--home=/opt/cloudera-manager/cm-5.0/run/cloudera-scm-server --no-create-home--shell=/bin/false --comment "Cloudera SCM User" cloudera-scm

3、配置CM Agent

修改文件/opt/cloudera-manager/cm-5.4.3/etc/cloudera-scm-agent/config.ini中server_host以及server_port

4、配置CM Server的数据库

将驱动包拷贝到目录下（注意拷贝过去的驱动包名字一定要和下边的一样，否则会报错）：

cpmysql-connector-java-5.1.31/mysql-connector-java-5.1.31-bin.jar/usr/share/java/mysql-connector-java.jar

执行：

mysql>grant all on *.* to 'temp'@'%' identified by 'temp' with grant option;

cd/opt/cloudera-manager/cm-5.4.3/share/cmf/schema

./scm_prepare_database.sh mysql -hmyhost1.sf.cloudera.com -utemp -ptemp --scm-host myhost2.sf.cloudera.com scmscm scm

例如：

./scm_prepare_database.sh mysql -h node1-utemp -ptemp --scm-host node1 scm scm scm

（对应于：数据库类型、数据库服务器、用户名、密码、CMServer所在节点…….）

mysql>drop user 'temp'@'%';

若上步失败或过程中操作中断，删除所有库、重头来过/(ㄒoㄒ)/~~

若安装Oozie等组件可能需要手动创建对应组件所需的数据库，例如：

create database ooziecm DEFAULT CHARACTER SET utf8;

grant all on ooziecm.* TO 'ooziecm'@'%' IDENTIFIED BY 'ooziecm';

其他的建库及删库脚本见步骤五

5、创建Parcel目录

Manager节点创建目录/opt/cloudera/parcel-repo，执行：

mkdir-p /opt/cloudera/parcel-repo

chowncloudera-scm:cloudera-scm /opt/cloudera/parcel-repo

将下载好的文件（CDH-5.4.0-1.cdh5.4.0.p0.27-el6.parcel、CDH-5.4.0-1.cdh5.4.0.p0.27-el6.parcel.sha、manifest.json）拷贝到该目录下。

Agent节点创建目录/opt/cloudera/parcels，执行：

mkdir -p/opt/cloudera/parcels

chowncloudera-scm:cloudera-scm /opt/cloudera/parcels

6、启动CM Server&Agent服务

执行：

Server：/opt/cloudera-manager/cm-5.4.3/etc/init.d/cloudera-scm-serverstart

Agents：/opt/cloudera-manager/cm-5.4.3/etc/init.d/cloudera-scm-agentstart

访问：http://ManagerHost:7180，若可以访问（用户名、密码：admin），则安装成功。

Manager启动成功需要等待一段时间，过程中会在数据库中创建对应的表需要耗费一些时间。

四、CDH5安装

CM Manager && Agent成功启动后，登录前端页面进行CDH安装配置。

免费版本的CM5已经去除50个节点数量的限制。

各个Agent节点正常启动后，可以在当前管理的主机列表中看到对应的节点。

选择要安装的节点，点继续。

接下来，出现以下包名，说明本地Parcel包配置无误，直接点继续就可以了。

点击，继续，如果配置本地Parcel包无误，那么下图中的已下载，应该是瞬间就完成了，然后就是耐心等待分配过程就行了，大约10多分钟吧，取决于内网网速。

（若本地Parcel有问题，重新检查步骤三、5是否配置正确）

接下来是服务器检查，可能会遇到以下问题：

Cloudera 建议将/proc/sys/vm/swappiness 设置为 0。当前设置为 60。使用 sysctl 命令在运行时更改该设置并编辑 /etc/sysctl.conf 以在重启后保存该设置。您可以继续进行安装，但可能会遇到问题，Cloudera Manager 报告您的主机由于交换运行状况不佳。以下主机受到影响：

通过 echo 0 >/proc/sys/vm/swappiness 即可解决。

接下来是选择安装服务：

测试采用了Hadoop默认，实际按工作环境来定咯~~

服务配置，一般情况下保持默认就可以了（ClouderaManager会根据机器的配置自动进行配置，如果需要特殊调整，自行进行设置就可以了）：

接下来是数据库的设置，检查通过后就可以进行下一步的操作了：

下面是集群设置的审查页面，我这里都是保持默认配置的：

终于到安装各个服务的地方了，注意，如果采用其他数据库安装Hive等组件的时候报错，检查之前配置CM Server数据库时，jar包拷贝位置及名称是否修改

服务的安装过程大约半小时内就可以完成：

安装完成后，就可以进入集群界面看一下集群的当前状况了。

这里可能会出现无法发出查询：对Service Monitor 的请求超时的错误提示，如果各个组件安装没有问题，一般是因为服务器比较卡导致的，过一会刷新一下页面就好了：

五、脚本

1、MySql建库&&删库

##amon

create database amon DEFAULT CHARACTER SET utf8;

grant all on amon.* TO 'amon'@'%'IDENTIFIED BY 'amon';

##hive

create database hive DEFAULT CHARACTER SET utf8;

grant all on hive.* TO 'hive'@'%'IDENTIFIED BY 'hive';

##oozie

create database oozie DEFAULT CHARACTER SET utf8;

grant all on oozie.* TO 'oozie'@'%'IDENTIFIED BY 'oozie';